Chat

Type live with the person signed in to a managed Windows device, from the device's page in the portal. A small chat window opens on their screen.

WindowsAccount Owners, Admins and MSP Technicians can chat; Read Only and MSP Read Only users cannot

In short

  • It is off until an Account Owner or tenant Admin turns on Allow chat with device users in Settings.
  • Only a technician can start a chat. The person at the device cannot start one.
  • Messages are not saved. The conversation is gone when the chat ends, and the Audit Log records that a chat happened, never what was said.
  • It runs alongside remote desktop, a remote shell, the file manager or an app install: chat does not use the device's single remote session.
  • Windows only, and the device must be online.

Requirements and access

Access
An Account Owner or tenant Admin turns on Allow chat with device users in the Remote Access card of Settings and clicks Save Changes. Account Owners, Admins and MSP Technicians can then chat. Unlike Remote Shell and the file manager, MSP Technicians need no extra account switch.
Device
A Windows device that is online, with an agent new enough to support chat and the Microsoft Edge WebView2 Runtime. Agents update themselves. Windows 11 includes the runtime and most Windows 10 devices have it. macOS is not supported.
Network
Nothing extra. Chat uses the agent’s normal connection to Pckgr. It does not use WebRTC, so no STUN or TURN servers are involved.

Start a chat

  1. Open a Windows device and click Chat.

    A panel titled "Chat with" and the device's name opens over the page. Nothing appears on the device yet. The button is disabled, with the tooltip "Device must be online", while the device is offline. It is not shown on Macs.
  2. Type in Write a message and press Enter.

    Your first message opens the chat window at the bottom right of the device user's screen, with the message in it. Shift+Enter starts a new line. Under your last message the panel shows "Sending", then "Delivered" once the message has reached the device.
  3. Close the panel with the X when you are done.

    Closing the panel ends the chat. So does leaving the device page.

The panel floats over the device page, so you can keep working on the page underneath. While it is open it takes the place of the support chat bubble in the corner of the page.

Once the chat window has opened, the panel's header shows the Windows account it opened for after "Live", for example PC\alex. A line above the message box tells you what the chat window on the device is doing.

The panel saysWhat it means
“The user sees nothing yet. The chat window opens on the device with your first message.”The chat has started and you have not sent a message.
“Waiting for the device to open the chat window.”You have sent a message and the device has not reported back yet.
“The chat window is open on the device.”The window is on the user’s screen.
“The user is away: the device is locked or they switched account. They will see your messages when they are back.”The window is still open, but the person cannot see it right now.
“The user closed the chat window. Your next message opens it again.”The chat is still open. Send a message to bring the window back.
“Nobody is signed in on this device, so there is no one to show the chat to.”There is no user session to show the window in.
“A different person is signed in on this device now, so this chat is not shown to them. End it and start a new chat to talk to them.”The chat belongs to the account its window first opened for. See Shared computers.
“The chat window could not be shown on this device.”The window failed to open, for example because the WebView2 Runtime is missing.
“Having trouble reaching Pckgr. Still trying; the chat ends if this lasts more than a minute or so.”Your browser has lost its connection to Pckgr. The panel keeps trying, and the line goes away when it gets through.

When the window on the device changes, a short note with the time also appears inside the conversation, so you see it when you look back from other work.

Note in the conversationWhen it appears
“The user closed the chat window”The person closed the window. The chat is still open.
“The chat window is open again”Your next message reopened a window the person had closed.
“The user stepped away”The device was locked, or the person switched to another account.
“The user is back”The person unlocked the device or switched back.
“A different person signed in on the device”Someone else is signed in now. The chat is not shown to them.
“The user signed out”Nobody is signed in any more.

Closing the window on the device does not end the chat. You see the note, and your next message opens the window again with the conversation so far.

During a remote desktop session, the Chat button in the viewer's toolbar opens the same chat docked beside the remote screen, so you can type with the person while you work on their device.

If you work across several tenants, start the chat from the remote desktop tab. That tab stays on its own tenant, so the session and its chat stay connected while you switch tenant in another tab. A chat on the device page belongs to the tenant you are working in and ends when you switch to another one.

One chat per device

If another technician already has a chat open with the device, the panel says "Another technician is chatting with this device." and offers Take over the chat, which ends theirs and starts yours. Only the technician who started a chat can read it.

What the person at the device sees

When your first message arrives, a small window opens at the bottom right of their screen, above the taskbar, with the message in it. It does not take the keyboard away from whatever they are typing in, and it follows the Windows light or dark setting.

  • The heading is the organization name and logo from the tenant's branding, or "IT Department" when no name is set.
  • On the taskbar the window shows the same logo, or a speech bubble when the tenant has no logo, and is named "Chat with" and the organization name.
  • Below it is your display name, as in "Alex Morgan is chatting with you". A technician with no display name appears as "Your IT team is chatting with you". Your email address is never shown.
  • The window says: "You're chatting with your IT team. Messages aren't saved after the chat ends."
  • They reply in the Write a reply box. Enter sends and Shift+Enter starts a new line, as in the portal.
  • They can minimize or close the window. Your next message brings it back with the conversation so far.
  • When the chat ends, the window says so, adds "This window closes by itself in a few minutes." and closes after three minutes. It names you, as in "Alex Morgan ended the chat", only when you ended the chat. Any other ending says "The chat has ended".

Shared computers

A chat belongs to the one Windows account its window first opened for. If someone else signs in to the device while the chat is open, the conversation is not shown to them. The panel tells you, and you end the chat and start a new one to talk to the new person.

On a computer with several people signed in at once, the chat goes to one signed-in session chosen by the agent: the person at the device's own screen when there is one, otherwise someone connected to it remotely.

Check who you are talking to

The panel's header shows the Windows account the chat window opened for. On a shared computer, check it before you type anything private.

When a chat ends

A chat is live only. It ends when any of these happens:

What happenedDetail
You close the panel or leave the device pageThe X on the panel is labeled “End the chat and close”.
Nobody has sent a message for 30 minutesThe panel says “The chat was idle for 30 minutes”.
The portal panel has been gone for about 90 secondsFor example, the browser tab was closed or your computer went to sleep.
The device has been unreachable for about a minuteThe panel says “The device stopped responding”.
Chat is switched off in SettingsEvery open chat in the tenant ends, and the panel says “Chat was switched off for this tenant”.
You switch to another tenantOnly for a chat on the device page. The panel says “You switched to another tenant, so this chat has ended”. A chat beside the remote screen stays open.
Another technician takes overYour panel says “Another technician started a chat with this device”.

A chat can also end if Pckgr is updated while it is open. The panel then says "The chat has ended". Start a new one. If your access to the tenant is removed or lowered, or you are signed out, the panel says "You no longer have access to this chat".

After a chat ends, the message box is disabled and the conversation stays in the panel until you close it. To talk again, close the panel and click Chat to start a new chat. It starts empty.

What is recorded

The conversation exists only while the chat is open, in the portal panel and in the window on the device. There is no history or transcript afterwards.

  • The Audit Log gets a Start Chat entry when a chat starts and an End Chat entry when it ends: who, which device, when, why it ended and how many messages were sent.
  • What was said is never recorded, in the Audit Log or anywhere else.
  • The conversation is not saved on the device.
  • A chat that ended by itself shows Pckgr (automatic) as the person on its End Chat entry.
  • A chat that ended because Pckgr was updated gets an End Chat entry too, with the reason "Pckgr was updated while the chat was open".
  • Turning chat on or off in Settings is recorded as Update Chat Setting.

The same start and end entries appear on the device's Activity tab.

Limits

Message length2,000 characters
The same limit applies in the portal and on the device.
Messages per chat500
Counting both sides. A chat that reaches the limit accepts no more messages: end it and start a new one.
Chats per deviceOne
A second technician can take over, which ends the first chat.
Idle time30 minutes
A chat with no message from either side for 30 minutes ends.
ContentPlain text
Emoji work. Links are shown as text and are not clickable. Files and pictures cannot be sent.

Troubleshooting

MessageWhat it means
“Chat is turned off for this tenant. An Owner or Admin can turn it on in Settings.”The switch in Settings is off for this tenant.
“This device cannot show the chat window yet. Its agent may still be updating, or the device is missing the Microsoft Edge WebView2 Runtime.”The device’s agent does not support chat yet, or the device does not have the WebView2 Runtime. The agent updates itself; try again after its next check-in. If it still says this, install the WebView2 Runtime on the device.
“This device is offline. Chat needs the device to be online.”The device is not connected to Pckgr right now.
“Another technician is chatting with this device.”Wait for them to finish, or choose Take over the chat, which ends their chat.
“This chat has reached its message limit. End it and start a new one.”The chat holds 500 messages. Close the panel and click Chat again.
“You no longer have access to this chat”Your access to the tenant was removed or lowered, or you were signed out. The chat is over for you; sign in again or ask an Owner or Admin.
“Not delivered” under a reply on the deviceThe reply could not be uploaded to Pckgr, for example because the device lost its connection, or the chat had just ended.

When a chat cannot start, the panel shows the reason and a Try again button.